JPI Patterned HTV

There will be 11" of workable space due to the printing of the design. 

You will need to purchase the TTD to work with this product. 

HTV Application Instructions: (heat press)

      • First, cut and weed material
      • Next, mask with TTD. 
      • Use mask to peel design from backer
      • Apply design at 295°F/146°C with medium pressure for 15 seconds
      • Finally, peel hot

HTV Application Instructions:  (home iron) 

    • First, cut, weed material
    • Next, mask design using TTD.
    • Use mask to peel design from backer.
    • Set iron dial between Cotton and Linen
    • Cover design with Kraft paper or non-stick cover sheet (Teflon)
    • Place on flat, hard surface (ironing board not recommended)
    • Press iron with medium/firm pressure (do not slide iron)
    • Press each section of design for 10-15 seconds
    • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
    • Finally, peel carrier hot or cold